The Board of Directors of Kotkamills Group Oyj has decided to make a pre-feasibility study for a paper machine investment to increase the production of Saturating Base Kraft (Laminating Papers)
In order to prepare Kotkamills Absorbex Oy, a subsidiary of Kotkamills Oy and the leading global supplier of Laminating Papers, to meet the increasing demand, as well as to replace the discontinuing production volume of Paper Machine 7 in Tainionkoski, Imatra (Stock Exchange release on the 3rd of July 2017), Kotkamills Oy has started the pre-feasibility study of a new Paper Machine 3 (PM 3) in Kotka. The final decision of this possible investment will be done by the end of year 2018. The capacity, cost estimation and start-up timing of the the PM 3 will be published later on subject to the positive investment decision.
After the possible start-up of the PM 3, Kotkamills Oy is maximizing the integration advantages of the Kotka site. In addition to the efficient investment cost of PM 3 to the already available infrastructure, the energy and fixed costs per produced volumes of the whole integrated site would be lower than today. The possible investment would have a positive impact on the profitability of Kotkamills Group.
In addition to the possible PM 3, Kotkamills Absorbex Oy will subcontract certain Laminating Paper grades from one or more European paper companies. First Laminating Paper trial reels from an external producer have already been delivered to a customer of Kotkamills Absorbex Oy.
For additional information, please contact:
CEO Markku Hämäläinen
tel. +358 40 721 0548, email@example.com
|New SVP, Consumer Boards, effective December 1st||1 November, 2018|
|Visit Kotkamills at LUXE PACK in Monaco||29 September, 2018|
|Meet Kotkamills at FachPack exhibition!||20 September, 2018|
|Welcome to Luxury Packaging show||5 September, 2018|
|Welcome to ForMóbile to meet our Absorbex® team!||10 July, 2018|
|Kotkamills en route towards a plastic free world – one coffee cup at a time||30 May, 2018|
|Kotkamills adds a new member to its family of plastic free consumer boards||28 May, 2018|
|Welcome to PulPaper/PacTec in Helsinki||23 May, 2018|
|Thank you for visiting HISPACK 2018!||20 May, 2018|
|Welcome to Packaging Première||14 May, 2018|
|Press release March 1st, 2018||1 March, 2018|
|The AEGLE™ has landed||23 February, 2018|